Spa Cover Care for your new Ideal™ Spa Cover | Spa Covers Etc.

Ideal Spa Cover Care

The Sun is a Killer!


If you keep the spa cover clean it will last for many years. Have you owned a spa cover in the past only to have it wear out in just a few short years? Did you ever clean it? Did you put any type of protectant on it?

 At least once a month the spa cover needs to be cleaned. Using a high pressure garden nozzle and a gentle liquid soap (Ivory. Palmolive, Dawn liquid soap) wet and wash the spa cover. Use a sponge to lift the dirt once the soap has been applied. Do NOT use any abrasives (SOS pad). Rinse and dry the spa cover to prevent hard water stains. This is best done early in the day before the cover has had a chance to warm up in the sun.

Every month we recommend using 303 Aerospace Protectant to prevent slow fade by 95% over the next 5 years. Your spa cover will love you and you will love how the old cover looks new. Simply spray on the 303 and wipe of excess. The 303 Aerospace Protectant has a SPF 40, its like sunscreen for your stuff!

For more information about spa/ hot tub covers and 303 Aerospace Protectant visit us @Spa Covers Etc - Home Page
Location: Dana Point, CA, USA

Comments

Post a Comment

Thank you for adding a comment to our blog. For more information contact us at 949) 496-2883 Mon-Fri 9am to 5pm PST.

Popular posts from this blog

Why Should Your Spa Cover's Foam Be Tapered? | Spa Covers Etc.

Spa Covers - T apered Foam Vs. Flat Foam by Spa Covers Etc. In the early years of the hot tub industry there wasn't much thought put into the engineering of the HOT TUB COVER . In the beginning, spa / hot tub covers were made of generic, off the shelf vinyl and a FLAT foam core. It didn't take long, usually after the first decent rain, the owner's of the covers reported that they have become very heavy (sometimes too heavy to lift). The flat foam core design allowed water to puddle on top of the cover and because ALL spa covers are sewn together, there are SEVERAL punctures (holes) in the vinyl dew to the stitches which allow water into the cover itself. This can water-log the foam core. Flat foam core covers do NOT encourage the water to run-off so the cover becomes heavy. Over time, the weight of the water puddling on the cover will cause the foam core to sag (bow) into the spa, exacerbating the problem ever more because the water begins to wick in
Read more

Why Do I Need A Hot Tub Cover? | Spa Covers Etc.

Why do I need a hot tub cover? Portable Spas - Fiberglass / Acrylic Spas / Hot Tubs If your spa / hot tub is made of fiberglass or acrylic, you MUST cover it because the sun's UV rays will damage all areas above the waterline. "Spider web" type cracks will begin to appear and they will eventually turn into cracks that cause the tub to leak. Plaster Spas (aka Gunite) Plaster spas (a type of cement) does not require a cover to protect it from the sun. The tile @ the waterline is designed to protect the plaster as the water level fluctuates from evaporation. But plaster spas do benefit from a cover (see below) and may be required by law in your state. Reasons To Cover Your Spa / Hot Tub 1) Local state ordinance may require that your cover is ASTM approved to be a child safety cover that is lockable. 2) Portable spas / hot tubs use electric heaters and are NOT able to raise the temperature of cold water to 104 degrees without a cover.  3) Users of portable sp
Read more